Transformer Bushing

Bushings mainly consist of insulators, conductive rods, gaskets, glands and protective sleeves.

It is manufactured in strict compliance with DIN dimensional tolerances, with deviations in outer diameter, inner diameter and wall thickness controlled at the micron level, ensuring seamless connection with global standard equipment, easy installation and high universality.

The voltage rating is determined by the creepage distance; the greater the creepage distance, the higher the voltage. With an increase in voltage and current, the diameter of the conductive rod shall be correspondingly larger.

The conductive rod flange, pressure plates, glands, gaskets and nuts are all made of H54 brass.