Transformer bushing terminal

Transformer accessory terminal block equipment wire clamps are mainly used for connecting the busbar down conductors of substations with the outgoing line terminals of electrical equipment such as transformers, circuit breakers, disconnectors, and bushings. According to the different angles between the down conductors and the terminals where the electrical equipment is installed, they are classified into terminal blocks with angles such as 0°, 30°, and 90°. This wire clamp adopts a screw sleeve and side slit design. After the wire clamp is installed on the equipment guide rod, the slit fastening bolts are tightened. It has the advantages of large electrical contact area and tight and firm connection. Transformer accessories terminals of the main types are: SBT12, 1416,18,20,24,30,33,36,42,4 S, 48,52,56 etc, has the M12 double holes, four hole surface 55 M12, M16 double hole, four hole surface 55 M16, M20, double holes M20 four hole surface style, etc. The material of the transformer accessory terminal blocks can be customized and can be divided into pure copper, red copper and other materials. Common transformer accessory terminal blocks include parallel terminals, right-angle terminals, 30-degree inclined flat terminal blocks, and 30-degree inclined pure copper pressed sheet clamping rod terminal blocks, etc.