A moisture absorber (also called a breather) is a dedicated air-purification device for oil-immersed transformers, installed on the air inlet of the oil conservator. As transformer oil expands and contracts with temperature, ambient air is drawn into the conservator through the absorber, where moisture and impurities are captured by the silica gel inside — keeping the oil clean and preserving its insulation strength. Tianjin Xingda offers three series with 23 models, silica gel 0.2–10 kg, covering transformer capacities from below 80 kVA up to below 500 000 kVA (500 MVA):
① XS1 Ordinary moisture absorber — cover and base injection-moulded from thermoplastic engineering plastic, polyamide 66 (PA66): high mechanical strength, good chemical-corrosion resistance, light weight and cost-effective; 8 models. ② XS2 Double-breathing slow-flow hygroscopic device — purification space and filtration capacity increased by 30% over ordinary types, with a fly-transparent glass cup, colour-changing silica gel and a maze-shaped intake channel at the bottom; fitted with an oil cup so silica gel can be replaced without power outage while the breathing process stays visible; 8 models. ③ XS3 Stainless-steel explosion-proof moisture absorber — stainless-steel cover + glass cover double protection, with viewing windows, oil collection cup and protective net; suited to large power transformers and harsh environments; 7 models.
Visible gel condition: the colour-changing silica gel turns from blue to red/pink as it saturates, so replacement or regeneration is obvious at a glance through the transparent cup. Easy installation: two mounting patterns on the same flange — four-hole (4-M12, Φ85, 85×85, for 0.2–10 kg) and three-hole (3-M8, Φ60, for small 0.2–1.0 kg units) — so both new and old conservators can be retrofitted directly.
Model naming: series – silica gel weight (e.g. XS1-5.0 = ordinary type with 5 kg of gel). Select by matching "gel weight – oil quantity – transformer capacity" directly from the tables.
Table 1 | XS1 Ordinary moisture absorber (0.2–10.0 kg silica gel, 8 models)
| Code | Type | H (mm) | h1 (mm) | ΦD (mm) | Silica gel (kg) | Transformer oil (kg) | Transformer capacity |
|---|---|---|---|---|---|---|---|
| XD.XSQ.1~0.2 | XS1-0.2 | 150 | 80 | 75 | 0.2 | 700 | Up to 80 kVA |
| XD.XSQ.1~0.5 | XS1-0.5 | 175 | 100 | 100 | 0.5 | 1500 | Up to 200 kVA |
| XD.XSQ.1~1.0 | XS1-1.0 | 250 | 180 | 100 | 1.0 | 3500 | Up to 630 kVA |
| XD.XSQ.1~1.5 | XS1-1.5 | 250 | 170 | 115 | 1.5 | 5000 | Up to 2000 kVA |
| XD.XSQ.1~2.0 | XS1-2.0 | 280 | 200 | 115 | 2.0 | 7000 | Up to 3150 kVA |
| XD.XSQ.1~3.0 | XS1-3.0 | 280 | 180 | 165 | 3.0 | 10000 | Up to 10000 kVA |
| XD.XSQ.1~5.0 | XS1-5.0 | 360 | 260 | 165 | 5.0 | 22000 | Up to 50000 kVA |
| XD.XSQ.1~10.0 | XS1-10.0 | 610 | 500 | 165 | 10.0 | 35000 | Up to 500000 kVA |
Table 2 | XS2 Double-breathing slow-flow hygroscopic device (0.2–10.0 kg silica gel, 8 models)
| Code | Type | H (mm) | h1 (mm) | ΦD (mm) | Silica gel (kg) | Transformer oil (kg) | Transformer capacity |
|---|---|---|---|---|---|---|---|
| XD.XSQ.0.2 | XS2-0.2 | 170 | 80 | 80 | 0.2 | 700 | Up to 80 kVA |
| XD.XSQ.0.5 | XS2-0.5 | 200 | 100 | 90 | 0.5 | 1500 | Up to 200 kVA |
| XD.XSQ.1.0 | XS2-1.0 | 260 | 130 | 120 | 1.0 | 3500 | Up to 630 kVA |
| XD.XSQ.1.5 | XS2-1.5 | 300 | 170 | 120 | 1.5 | 5000 | Up to 2000 kVA |
| XD.XSQ.2.0 | XS2-2.0 | 330 | 200 | 120 | 2.0 | 7000 | Up to 3150 kVA |
| XD.XSQ.3.0 | XS2-3.0 | 355 | 180 | 165 | 3.0 | 10000 | Up to 10000 kVA |
| XD.XSQ.5.0 | XS2-5.0 | 435 | 260 | 165 | 5.0 | 22000 | Up to 50000 kVA |
| XD.XSQ.10.0 | XS2-10.0 | 680 | 500 | 165 | 10.0 | 35000 | Up to 500000 kVA |
※ XS2 units are taller than the corresponding XS1 sizes to accommodate the enlarged purification space and maze-shaped intake channel.
Table 3 | XS3 Stainless-steel explosion-proof moisture absorber (0.5–10.0 kg silica gel, 7 models)
| Code | Type | H (mm) | ΦD (mm) | Silica gel (kg) | Transformer oil (kg) | Transformer capacity |
|---|---|---|---|---|---|---|
| XD.XSQ.2~0.5 | XS3-0.5 | 200 | 135 | 0.5 | 1500 | Up to 200 kVA |
| XD.XSQ.2~1.0 | XS3-1.0 | 390 | 140 | 1.0 | 3500 | Up to 630 kVA |
| XD.XSQ.2~1.5 | XS3-1.5 | 430 | 140 | 1.5 | 5000 | Up to 2000 kVA |
| XD.XSQ.2~2.0 | XS3-2.0 | 460 | 140 | 2.0 | 7000 | Up to 3150 kVA |
| XD.XSQ.2~3.0 | XS3-3.0 | 500 | 170 | 3.0 | 10000 | Up to 10000 kVA |
| XD.XSQ.2~5.0 | XS3-5.0 | 550 | 170 | 5.0 | 22000 | Up to 50000 kVA |
| XD.XSQ.2~10.0 | XS3-10.0 | 670 | 220 | 10.0 | 35000 | Up to 500000 kVA |
※ XS3 construction from top to bottom: installing flange (silica gel inlet) → glass cover with viewing window → tie rod → stainless-steel cover → glass bucket → oil collection cup → protective net. Only H and ΦD are listed in the original catalogue.
| Application | Recommended series | Notes |
|---|---|---|
| Small distribution transformers (≤200 kVA), pad-mounted substations | XS1-0.2 / 0.5 | Three-hole mounting 3-M8, Φ60 — lightest option |
| Standard 630–3150 kVA distribution transformers | XS1-1.0 ~ 2.0 | PA66 injection-moulded, best cost-performance |
| 35 kV+ power transformers, unattended substations | XS2 (any capacity step) | +30% purification capacity, gel replacement without outage, visual inspection via colour-changing gel |
| Large power transformers (>10000 kVA), heavy pollution / explosion-proof requirement | XS3-3.0 ~ 10.0 | Stainless-steel explosion-proof cover + oil collection cup + protective net, ΦD up to 220 |
| One-stop procurement | Any of XS1 / XS2 / XS3 | Same factory as XD transformer bushings — complete the transformer in one order |
The moisture absorber is an XD self-manufactured transformer accessory: all three series, 23 models, full tooling and stable supply, silica gel 0.2–10 kg covering 80 kVA to 500 MVA — bushings and breathers for one transformer can be sourced from the same factory in a single order. The XS2 double-breathing slow-flow structure increases purification space by 30% and allows silica gel replacement during operation without outage; the XS3 stainless-steel explosion-proof structure with double covers, viewing window and oil collection cup is built for long maintenance-free service on large power transformers. Cup material (engineering plastic / glass / stainless steel), silica gel type and flange hole pattern can all be customised to the customer's conservator interface; silica gel charge and oil quantity can be supplied with the unit, ready to install.
Contact: Tianjin Juyida Technology Co., Ltd
WhatsApp: +86 13662056855
Tel:
E-mail: solomon20210701@tjxddq.com
Add: Unit‑101, Workshop 3, Bozhong Automobile Industrial Park, No.5 Xianghui Road, Intersection of Xianghui Road and Gaoying Road, Beizhakou Town, Jinnan District, Tianjin, China